Non spray PP
2025-08-23
Spray free material PP Polyx P2310E:
Features: High gloss; Scratch resistant.
Applications: Automotive trim, bumper guards, door handles, etc.
Project | Test Standard | Unit | PP-Tolyx P2310E |
Density | ISO 1183 | g/cm3 | 1.05 |
Melt Flow Index | ISO 1133, 230℃/2.16KG | g/10min | 35 |
Shrinkage Rate | ISO 294 | % | 0.9-1.1 |
Tensile Strength | ISO 527 | MPa | 18 |
Flexural Modulus | ISO 178 | MPa | 1200 |
Impact strength of cantilever beam gap | ISO 180 | MPa | 25 |
Heat Deflection Temperature | ISO 75, 0.45MPa | ℃ | 100 |
Cross scraping | PV3952，10N | Delta L | ≤0.8 |
